Turnkey · HVAC for Factories and Industrial Sites

Industrial HVAC for factories and warehouses in Kocaeli and Sakarya

ABF İklimlendirme Sistemleri surveys, designs, installs and maintains air conditioning, heating, cooling and ventilation systems for factories, production plants, warehouses and sites in organised industrial zones (OSBs) in Kocaeli and Sakarya. We look at machine heat, shift patterns and site conditions, calculate office and production areas separately, and plan equipment, pipework and installation around your production schedule.

Factories and Industrial Sites

What does industrial HVAC cover?

Industrial HVAC deals with the specific conditions of factories, production plants, warehouses and OSB sites: high heat loads, shift work, dusty or chemical environments, and the split between offices and production areas. We assess requests from sites in Gebze, Dilovası, Çayırova, Körfez and Hendek in Sakarya according to the building and process conditions.

Production plants

Designs that calculate loads, air quality and use conditions separately for office and production areas, sharing a system where it suits and using separate systems where needed.

Logistics warehouses and bonded stores

Zoned systems for the office blocks and dispatch offices of high-bay warehouses.

OSB administrative buildings

Floor-by-floor control for management and technical offices in organised industrial zones.

Heavy industry and chemicals

Dust, oil mist, chemicals and any hazardous area classification are recorded, and areas where standard comfort equipment is not suitable are identified at the start of the project.

Laboratories and R&D

Temperature and humidity, fresh air, pressure direction, filtration and redundancy requirements are defined together with your process manager.

New plant construction

Copper piping installed during construction, so commissioning runs on infrastructure planned in advance. See copper piping.

Which System?

Choosing the right system mix for your site

In industry, the right answer is rarely one system. It is usually the right systems combined in the right places.

VRF for office blocks

VRF (variable refrigerant flow) connects many indoor units to one outdoor unit group through refrigerant piping, with each zone controlled separately. It can zone offices and other comfort areas; laboratories and production areas are assessed separately for process, air quality and safety needs. VRF systems

Rooftop units for production halls

A rooftop unit is a packaged air conditioner installed on the roof, with the whole refrigeration circuit in one casing. It can be considered for large open spaces such as production halls and warehouses; fresh air ratio and equipment are confirmed for the model and project.

Air handling units and ventilation

An air handling unit (AHU) filters fresh air, heats or cools it and distributes it through ducts. We supply, install and service AHUs, and design, fabricate and install ductwork for fresh air, exhaust and process extraction. Ventilation systems

Large Spaces

Heating, cooling and process solutions for large spaces

Where ceilings are high, doors open often or many people work in one space, no single type of equipment fits every job. These are the solutions we compare for each type of space.

Factory and warehouse heating

In a high-ceiling hall, warm air collects under the roof while the working area at floor level can stay cold. We compare rooftop units, air handling units, VRF or heat pumps, radiant heaters and warm air unit heaters for the way the space is used.

Evaporative cooling

Evaporative coolers cool outdoor air by evaporating water and supply it to the building. They are considered for production and warehouse areas with frequently open doors and high ventilation needs; because they add moisture, they may not suit humidity-sensitive areas.

Chillers and process cooling

Central chillers that supply chilled water to air handling units, fan coil units or process equipment: installation, maintenance and breakdown service. Chiller service

Cold storage

Panel cold rooms, refrigeration installation, planned maintenance and breakdown service for food and product storage. Cold storage

Mechanical contracting

For contractors and investors: quotes based on drawings and bills of quantities, site installation, testing and handover for HVAC, ventilation and heating installations.

Air domes and sports halls

In inflatable sports halls and domes, the air supply fan that keeps the structure up works together with heating and cooling. We plan both in the same project.

Engineering Details

Details that decide system life in industrial sites

Heat load calculation

Machine heat, building envelope, occupancy and lighting loads are calculated room by room. The wrong capacity means high energy bills and poor comfort.

Leak tightness and nitrogen testing

Copper pipework is pressurised with nitrogen and tested. On sites with long pipe runs, this has a direct effect on system life.

Deep vacuum

Before commissioning, the system is cleared of moisture and non-condensable gases. This is critical for compressor life.

Planning around production

On shift-based sites, work that needs a shutdown is moved to shift changes and weekends.

Process

Design and installation process

1

On-site survey and heat load calculation

We inspect your building or site and calculate the load room by room, so the quote is based on calculation.

2

Design and equipment selection

System type, capacity and control scenario are designed, and we provide comparative quotes for different brands.

3

Installation

Copper pipework is installed and pressure-tested with nitrogen. The work is planned so it does not disrupt your operations.

4

Commissioning and handover

Vacuum, refrigerant charging and performance tests are carried out, and the system is handed over with a measurement report.

5

Planned maintenance

A maintenance schedule is set from the equipment list, operating conditions and manufacturer's instructions; measurements and findings are recorded. Planned maintenance

Service Area

Where we work and where emergency service applies

Our team is based in İzmit. We cover all districts of Kocaeli, including the industrial zones in Gebze, Dilovası, Çayırova and Körfez, as well as Sakarya. Our emergency breakdown service covers Kocaeli, Sakarya, İstanbul and Yalova; we prioritise urgent breakdowns, especially those that stop production.

We also travel to factories, warehouses and production plants in the neighbouring provinces of Bursa, Düzce, Bolu and Bilecik for design, installation and planned maintenance. Work in these provinces is planned in advance; our emergency breakdown service covers Kocaeli, Sakarya, İstanbul and Yalova.

FAQ

Frequently asked questions about industrial HVAC

Can you plan the installation around our production schedule?

If site and safety conditions allow, the work can be phased around your shift pattern. Noisy work, power or production shutdowns and access restrictions are set out in a written work schedule after the site survey.

Can offices and production areas share one system?

Loads and operating conditions of offices, laboratories and production areas need to be assessed separately. Suitable areas can be zoned on one VRF outdoor unit group, while fresh air, pressure, contaminant and redundancy needs of laboratories and process areas are solved separately. We base investment and running-cost estimates on a comparative calculation.

Will the system work well in a dusty or chemical environment?

There is no single answer for every site. Dust, oil mist, chemicals, temperature and any hazardous area classification are recorded, and the equipment, filters, outdoor unit location and maintenance method must suit those conditions. Standard comfort air conditioners may not be suitable for some process areas.

Which system suits a large production hall or warehouse?

For large open spaces, rooftop units, ducted systems, industrial ventilation and other solutions can be compared, and a separate VRF system can be considered for the offices. The economic outcome cannot be stated until load, ductwork, fresh air, roof and operating data have been calculated.

What is the difference between industrial and standard air conditioning?

Industrial air conditioning usually means systems such as rooftop units, air handling units, ducted units or large-capacity VRF, chosen to handle large volumes and long operating hours. A domestic split unit serves a single room, while a production area also has to account for machine heat, dust, fresh air needs and shift work. That is why the load and operating conditions are defined before choosing equipment.

Do you serve the OSBs in Kocaeli?

Yes. The organised industrial zones in Gebze, Dilovası, Körfez and the surrounding area are within our service area. For a breakdown there, call us: we prioritise urgent breakdowns. Planned maintenance visits are scheduled according to team and calendar availability.

On-site survey for your plant

We inspect your factory or site and prepare a comparative quote that takes account of your production pattern, site safety and any shutdowns needed.

Request a Quote