Cold storage and cold room installation and service in Kocaeli and Sakarya
ABF İklimlendirme Sistemleri builds cold rooms and cold storage warehouses for businesses in Kocaeli and Sakarya. Our own team installs the sandwich panel room, floor, door and refrigeration system as one turnkey package, and then provides planned maintenance and breakdown service.
We work with monoblock, split and central (rack) refrigeration systems, from small cold rooms to large stores. We do not rent out storage space.
Urgent Is your cold room down right now? Call us. In Kocaeli, Sakarya, İstanbul and Yalova we prioritise urgent breakdowns, starting with calls where stock is at risk.
What we do
Site survey and capacity calculation
We calculate the cooling load from the product to be stored, the target temperature, room size, daily product intake and door use.
Panel room installation
Our own team installs the sandwich panel walls and ceiling, the cold room door and the joint details. The room and the refrigeration system are delivered by one contractor.
Refrigeration installation
We install a monoblock, split or central system with its pipework, electrical and control connections, and commission it.
Planned maintenance
Condenser and evaporator cleaning, defrost, refrigerant and pressure checks, electrical connections and door seals are checked at regular intervals. Maintenance scope
Emergency breakdown service
Our emergency breakdown service covers Kocaeli, Sakarya, İstanbul and Yalova. Calls are prioritised by urgency, and breakdowns that put stock at risk come first.
Refrigerant, compressor and controls
Leak detection, refrigerant charging, compressor replacement, fan motors, control panel, thermostat, sensor and alarm work.
How is a cold store built?
Installation follows four steps: site survey, design and written quote, panel room and refrigeration installation, then commissioning. Because the room and the refrigeration system come from one team, responsibility stays in one place.
On-site survey
We inspect the storage area, the product, the target temperature, the electrical supply, the floor and the location for the outdoor unit.
Design and written quote
We calculate the cooling load and set out in writing the equipment, panel and door sizes, installation items, work schedule and anything not included in the quote.
Panel room and refrigeration installation
Floor preparation, panel walls and ceiling, door, refrigeration unit, pipework, electrical and control connections.
Commissioning and handover
We bring the store down to the target temperature and check its operation with you. After that, our own team continues with planned maintenance and breakdown service.
What should the panels, floor and door be like?
A cold room's efficiency depends largely on its insulation. Because we build the panel room ourselves, we plan these three items together with the refrigeration system.
Panels and installation
A sandwich panel is a prefabricated wall or ceiling element with insulating foam between two metal skins. Panel thickness is chosen for the target temperature; sub-zero rooms need thicker panels. Joints and corners are sealed to prevent heat loss and moisture ingress.
Floor
The floor must carry the product load and traffic such as pallet trucks. In sub-zero stores the floor is insulated and measures are planned to stop the ground beneath from freezing. For small above-zero rooms, the floor solution is agreed during the survey.
Door and seal
Hinged doors suit small rooms; sliding doors suit wide openings. In sub-zero rooms, the door frame has a heater to stop it from freezing. A worn seal lets in warm air and moisture, so the evaporator ices up faster.
Monoblock, split or central system?
The right system depends on the room size, the product and how the business operates. We compare the options with you during the survey.
Monoblock unit
The compressor, condenser and evaporator are in one casing, mounted on the room's wall or ceiling. It is a practical choice for small and medium cold rooms in butcher shops, markets and restaurants. Installation is quick, but the unit's heat and noise stay right next to the room.
Split system
The compressor and condenser are outside, and the evaporator (the cooling unit inside) is in the room. Heat and noise stay away from the room. It is preferred for medium and large stores, or where the outdoor unit can be placed in a suitable spot.
Central (rack) system
Several compressors work in one system and can serve more than one room. If one compressor stops, the others can keep running. It is considered for large supermarkets, logistics and production sites.
What determines refrigeration capacity and cost?
How many kW does a cold store need?
The capacity of the refrigeration unit cannot be read from the room volume alone; it comes from a load calculation. The calculation looks at room volume, target temperature, product type and daily intake, how often the door is opened and the outdoor temperature. An undersized unit runs constantly and cannot reach the required temperature.
What affects the cost of a cold store?
- Room volume and target temperature (above or below zero)
- Panel thickness, floor insulation and door type
- Refrigeration system: monoblock, split or central
- Distance between the unit and the room, and the pipework
- Electrical supply, control and alarm requirements
Because these items vary widely between projects, we give the price in a written quote after the survey.
Which businesses, and at what temperature?
We build cold stores for food production, meat and dairy, fruit and vegetables, butcher shops and markets, hotel and restaurant kitchens, warehousing and logistics, and healthcare products.
The right temperature depends on the product. The target temperature and humidity are set by your quality or food safety manager, based on the product and the applicable regulations; we select and install the system to meet that value.
What do we check during planned maintenance?
- Condenser and evaporator cleaning, fan operation
- Defrost heaters, defrost timing and drain line
- Refrigerant pressures, leak checks and compressor operating values
- Electrical panel connections, protection devices and contactors
- Thermostat, sensor and alarm tests
- Door seal, door heater and panel joints
We agree the maintenance interval with you based on how heavily the store is used and the site conditions, and log every visit in a service record.
Where do we work?
Our team travels from İzmit to all districts of Kocaeli and to Sakarya. We install, maintain and repair cold stores in the organised industrial zones (OSBs) of Gebze and Dilovası, along the port and warehouse corridor in Körfez from Yarımca to Hereke, in central Adapazarı and around the Sakarya 2. OSB in Hendek.
Projects in İstanbul and Yalova are scheduled according to distance. If your production site also needs air conditioning or process cooling, see industrial HVAC and chiller service.
Frequently asked questions about cold storage
Do you build the panel room as well?
Yes. Our own team installs the sandwich panel walls, ceiling and cold room door, and delivers them together with the refrigeration system as a turnkey package.
How long does installation take?
It depends on the room size, the system type and the lead time for panels and equipment. We give the work schedule in writing in the quote.
Will you take over maintenance of our existing cold store?
Before taking over maintenance, we inspect the system on site and tell you clearly what condition it is in and what work is needed.
Is there a difference between a cold room and a cold store?
They usually describe the same thing; "cold room" tends to mean smaller volumes and "cold store" larger storage areas. In both cases, the calculation and system choice depend on volume, product and how the space is used.
Do you also build small cold rooms?
Yes. We build small cold rooms for butcher shops, markets, restaurants and production workshops. At these sizes a monoblock unit is often practical; we make the choice with you during the survey.
How much electricity does a cold store use?
Consumption depends on the target temperature, panel and door insulation, how often the door is opened, the outdoor temperature and whether the unit is correctly sized. A dirty condenser and an iced-up evaporator also increase consumption. A single figure would be misleading; regular maintenance helps keep consumption down.
Do you rent out cold storage space?
No. We do not rent out storage. We build your business's own cold store or cold room and provide its maintenance and breakdown service.
What should I do if the cold store breaks down?
Call us straight away on +90 532 213 78 66. In Kocaeli, Sakarya, İstanbul and Yalova we prioritise urgent cold storage breakdowns where stock is at risk. Keep the door closed as much as possible until our team arrives.
Survey and quote for your cold storage project
Tell us the product, the target temperature and the room size. We will inspect the site and prepare a written quote.